DT SWISS TOOLS
Find out about the specific tools you need to maintain your DT Swiss hub.
DT Swiss EXP bearing installation tool 15/26x40
DT SWISS tool mounting bush short for EXP hubs rear wheelOriginal DT Swiss tool for mounting the ball bearings on your DT Swiss EXP rear hub.Technical specifications:Material: aluminumUse/compatibility: for mounting the bearing 1526 ESB/ESNB L from EXP rear hubs..
R490.00
(Incl VAT)R490.00
R1,500.00
DT SWISS HUB SEAL TOOL
designed to allow precise installation of the seal that is found between the hub body and freehub on many DT Swiss 'ratchet' rear hubs, including the 180, 180 EXP, 240, 240s, 240 EXP, 340, 350 (but not the 350 Ratchet LN).180, 180 EXP, 240, 240s, 240 EXP, 340, 350...
R380.00
(Incl VAT)R380.00
DT Swiss Tool- Ratchet DEG
The DT Swiss Ring Nut Installation Tool for Ratchet DEG Hubs is the dedicated tool for removing and installing the threaded ring nut on DT Swiss hubs equipped with the Ratchet DEG system. This steel tool fits into a vice for leverage, allowing safe, precise removal and installation of the ring ..
R2,400.00
(Incl VAT)R2,400.00
DT Swiss Tool- RATCHET EXP OS
Mounting/dismounting tool for the threaded ring of DT Swiss hubs with Ratchet EXP system.The DT Swiss EXP OS (Oversized) Ratchet Disassembly Tool is a specialized, durable steel tool designed specifically to remove and install the threaded ring nut on DT Swiss Ratchet EXP Hybrid (OS) hubs. It r..
R1,550.00
(Incl VAT)R1,550.00
DT Swiss Tool-Ratchet EXP
DT Swiss Ratchet EXP Ring Drive Tool works to remove or install ratchet rings found within select DT Swiss hubs...
R1,800.00
(Incl VAT)R1,800.00
DT Swiss Tool-Ringnut Ratchet
Special tool that allows the disassembly of the threaded ring of DT Swiss 240 / 240s / 180 / 350 hubs and all other DT Swiss star ratchet hubs. 3Disassembling is necessary to replace the bearings of the non-driveside..
R1,450.00
(Incl VAT)R1,450.00
DT SWISS TOOLKIT 15/24 BEARINGS
The mounting tool set contains 2 mounting bushes for the front wheel bearings and a two-part tool for mounting/dismounting the pressed-in end caps.suitable for 180 MTB hubs with bearing 6802 and diameter 15/24mm (XRC 1200 Spline from MY 07/2024)..
R4,300.00
(Incl VAT)R4,300.00